Muratec MFX-2550 - Manual (Page 11)

x Precaution
Precaution
Besides the “Safety Information” supplied with this product, please observe the following
instructions.
Installation Precautions
Installation Site „
To ensure utmost safety and prevent possible malfunctions, install the machine in a
location that meets the following requirements:
A location away from curtains, etc. that may catch fire and burn easily •
A location that is not exposed to water or other liquids •
A location free from direct sunlight •
A location out of the direct airflow of an air conditioner or heater, and not • exposed to
extremely high or low temperatures
A well-ventilated location •
A location that is not exposed to high humidity •
A dust-free, or low-dust, environment. •
A location not subjected to undue vibrations •
A stable and level location •
A location where ammonia or other organic gases are not generated •
A location that does not put the operator in the direct airflow of exhaust from the •
machine
A location that is not near any kind of heating devices •
Power Source „
The power source requirements are as follows.
Voltage Fluctuation: AC • 120 V ± 10 Hz
Frequency Fluctuation: Within ± 3Hz •
Use a power source with as few voltage or frequency fluctuations as possible. •