Muratec MFX-2550 - Manual (Page 44)

1
Introduction
Loading Paper 1-23
Loading Paper
Acceptable Paper
Paper cassette
Paper type Paper size Quantity
Plain paper
(weight: 20-24 lbs.) Letter, Legal, Half-letter 500 sheets
(weight: 20 lbs.)
Bypass tray
Paper type Paper size Quantity
Plain paper
(weight: 20-24 lbs.) Letter, Legal, Half-letter , Executive, A4, A5,
A5 , A6, F4 50 sheets
(weight: 20 lbs.)
Custom sizes
• Width: 3.8 to 8.5 in. (97 to 216 mm)
• Length: 5.5 to 14.0 in. (140 to 356 mm) 1 sheet
Pasteboard
(weight: 20-28 lbs.) Letter, Legal, Half-letter , Executive, A4, A5,
A5 , A6, F4 20 sheets
Envelopes DL: 4.3 × 8.7 in. (110 × 220 mm)
Com#10: 4.1 × 9.5 in. (105 × 241 mm)
Monarch: 3.9 × 7.5 in. (98.4 × 190.5 mm) 1 envelope
Postcard 3.9 × 5.8 in. (100 × 148 mm) 20 sheets
Transparency Letter 20 sheets
Note
Custom-sized paper can be used for PC printing only. •
Do not use envelopes with double flaps or pressure seals since these do not feed •
properly.
When printing on transparency (OHP film), the quality may differ according to the •
type of OHP film and the usage environment. (Confirmed OHP film: PP2500 from
3M.) Be sure that the film does not have a paper backing and/or leading strip. If it
does, remove the paper backing and/or strip before loading. Only the film should go
in, film with paper backing or a leading strip should not be fed.
Duplex printing
Paper type Paper size
Plain paper
(weight: 20-24 lbs.) Letter, Legal