Metra Electronics 99-8223S - Manual (Page 4)

99-8223 KIT ASSEMBLY
2
A
B
C D
DIN RADIO WITH POCKET PROVISION
Slide the Radio Housing Brackets onto
the sides of the Radio Housing until the
side clips engage. NOTE: Tabs are
marked Left and Right. (Figure B) 2
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward. (Figure C) 3
Slide the aftermarket radio into the
cage until it snaps into place. (Figure D) 4
Attach the clips removed from the fac-
tory radio to the back of the radio
housing trim plate. (Figure A) 1
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.