Metra Electronics 99-8223S - Manual (Page 5)

99-8223 KIT ASSEMBLY
3
A
B
C D
ISO MOUNT RADIO WITH POCKET PROVISION
Slide the Radio Housing Brackets onto
the sides of the Radio Housing until the
side clips engage. NOTE: Tabs are
marked Left and Right. (Figure B) 2
Mount the ISO Brackets to the radio
using the screws supplied with the
radio. (Figure C) 3
Slide the radio into the radio housing
until it snaps into place. (Figure D) 4
Snap the Trim plate onto the front of
the Radio Housing. (Figure D) 5
Attach the clips removed from the fac-
tory radio to the back of the radio
housing trim plate. (Figure A) 1
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.