Configuring the ports, Configuring the ports -14 – Moxa Technologies UPORT 1600 User Manual
Page 23
Advertising
UPort 1200/1400/1600 Series User’s Manual
Driver Installation
2-14
Configuring the Ports
After the driver has been installed, use Device Manager to configure the UPort serial ports.
1. With the System Properties window open, click on the Hardware tab, and then click on
Device Manager.
2. Expand the Multi-port serial adapters tab, right click MOXA UPort 1450 Series, and then
click Properties to open the UPort’s configuration panel.
Advertising
This manual is related to the following products: