Moxa Technologies UPORT 1600 - Manual (Page 26)

UPort 1200/1400/1600 Series User’s Manual Driver Installation
2-17
Other Settings
Reset default
If you click the Rest default button, all the settings will return to Factory default settings:
COM Number: <Assign available COM number automatically>
Tx Mode: Hi-Performance
UART FIFO: Enable
Fast Flush: Enable
Interface: RS-232
View All Settings:
You can preview all ports settings with this function.
Advance Settings
COM Preserver – Driver Setting Management
UPort provides one special function to help you manage the UPort settings. In the general case,
you need write down all the settings including COM number to prevent them from being lost.
In some applications, to clone multiple systems you also need to worry about how to clone the
COM Port settings. Using the UPort COM Preserver function, you just need to save all the
settings into UPort device directly– just like a USB Mass Storage device. You do not need to
record it using additional paper or disk. If your host crashes, you can just install the driver into
new host, plug the original UPort and click the Restore button to restore all settings back very
quickly.
NOTE If you want to use these settings in another PC, be sure the PC has a free COM port available.
Otherwise, the new settings will copy over the settings of a COM port that is already in use.
y Save
Save all settings to UPort.