Magellan GPS 310 - Manual (Page 34)

28
Changing Distance Units
Your distance units can be in miles and miles per hour (MI-
MPH), nautical miles and knots (NM-KTS), or kilometers
and kilometers per hour (KM-KPH). To change the units,
press MENU until SETUP is displayed at the top of the screen
and press ENTER . Use the RIGHT ARROW until SETUP
UNITS is displayed. Press ENTER again and, the distance
unit of measure begins to flash. Use the RIGHT/LEFT
ARROWs to scroll through the list of units and press ENTER
when the desired unit of measure is displayed.
Changing Time Display and Time
To change the way that time is displayed (12 HOUR- default,
24 HOUR, or UT), repeatedly press MENU until SETUP is
displayed at the top of the screen and press ENTER . Use the
RIGHT ARROW until SETUP TIME is displayed. Press
ENTER again and the time display begins to flash. Use the
RIGHT/LEFT ARROWs to scroll through the list and press
ENTER to select. The screen changes to TIME SET. Use the
ARROW pad to set the time and press ENTER when done.
(You are not prompted to set the time if you selected UT as
the time format.)
When you change your clocks because of daylight savings
time, remember to change the time in your GPS 310.