Magellan GPS 310 - Manual (Page 36)

30
SELECT COUNTRY or STATE. Use the ARROW pad to
change the flashing text to select the country or state for your
present location.
Press ENTER .
ENTER ELEVATION. Use the ARROW pad to enter the
approximate elevation for your position. If unknown, leave
the elevation at 0. Press ENTER .
ENTER TIME. Use the ARROW pad to enter your present
time. Press ENTER .
ENTER DATE. Use the ARROW pad to enter the date.
Press ENTER .
Note: The prompts to enter time and date will not appear if
your receiver has already collected this information from the
satellites.
Activating the Demo Mode
To turn on the Demo Mode, press MENU until SETUP is
displayed at the top of the screen and press ENTER . Use the
RIGHT ARROW until SETUP DEMO is displayed. To
toggle between ON or OFF, press ENTER . The present
status, on or off, will flash. Use the LEFT/RIGHT ARROWs
to switch between on and off and press ENTER .
While in the Demo Mode, the receiver displays sample
information on the POSITION and both NAVIGATION
screens.