Miele T 4462 C - Manual (Page 19)

Changing a programme while it
is running
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations). If the programme selector
is turned to a different programme after
a programme has begun, this will not
affect the programme. The
Anti-crease/Finish indicator light will
flash. The indicator light will go out
when the selector is returned to its
original position.
You will need to cancel the current
programme before you can select a
new one.
To cancel a programme
^ Turn the programme selector to
Finish .
To select a new programme
^ Turn the programme selector to the
required programme.
^ Select or deselect any additional
options required.
^ Press the Start button.
To interrupt a programme
^ Switch the dryer off with the
I-On/0-Off button.
To continue drying
^ Switch the dryer back on with the
l-On/0-Off button.
The programme will continue as long as
the cooling down phase has not been
reached.
Adding or removing laundry
after a programme has started
^ Press the Door button.
^ Open the door.
,
Do not touch the back of the
drum when adding or removing
items. The drum could be very hot -
danger of burning.
^ Add or remove items.
^ Close the door.
To continue drying
^ Press the Start button.
Notes
The time left shown in the display may
now vary from the actual drying time.
Changing the programme sequence
19