Subscriber number +cnum, Network registration +creg – Maxon Telecom MODMAX MM-6280IND User Manual
Page 25
HSDPA Standard At Commands Page 25 of 61 Version 1.2
+CCFC
Mand.
Call forwarding number and conditions
NA
+CCWA
Opt.
Call waiting
NA
+CHLD
Opt.
Call related supplementary services
NA
+CTFR Opt.
Call
deflection
Not
supported
+CUSD
Opt.
Unstructured supplementary service data
NA
+CAOC
Opt.
Advice of Charge
NA
+CSSN Opt.
Supplementary
service
notifications
NA
+CLCC
Opt.
List current calls
NA
+CPOL=[<index>
][,
format>[,<oper>]]
Opt.
Preferred operator list Parameter values supported:
<index> – 0 to 50
<format> – 0,2
Supported
+CPLS
Opt.
Selection of preferred PLMN list
Not supported
+COPN
Opt.
Read operator names
Supported
+CAEMLPP
Mand.
eMLPP Priority Registration and Interrogation
Not supported
+CPPS Mand.
eMLPP
subscriptions
Not
supported
+CFCS
Mand.
Fast call setup conditions
Not supported
+CAAP
Mand.
Automatic answer for eMLPP Service
Not supported
+CUUS1
Opt.
User to User Signalling Service 1
Not supported
1.18. Subscriber number +CNUM
Action command returns the MSISDNs related to the subscriber (this information can be stored
in the SIM/UICC or in the MT). When storing information in the SIM/UICC, if a SIM card is
present or if a UICC with an active GSM application is present, the information is stored in the
EF
MSISDN
under DF
Telecom
. If a UICC with an active USIM application is present, the information is
stored in the EF
MSISDN
under ADF
USIM
). If subscriber has different MSISDN for different services,
each MSISDN is returned in a separate line.
Table 14.
+CNUM action command syntax
Command
Possible response(s)
+CNUM +CNUM:
[<alpha1>],<number1>,<type1>[,<speed>,<service>[,<itc>]]
[<CR><LF>+CNUM: [<alpha2>],<number2>,<type2>[,<speed>,<service>
[,<itc>]]
[...]]
+CME ERROR: <err>
+CNUM=?
1.19. Network registration +CREG
Action command returns the MSISDNs related to the subscriber (this information can be stored
in the SIM/UICC or in the MT). When storing information in the SIM/UICC, if a SIM card is
present or if a UICC with an active GSM application is present, the information is stored in the
EF
MSISDN
under DF
Telecom
. If a UICC with an active USIM application is present, the information is
stored in the EF
MSISDN
under ADF
USIM
). If subscriber has different MSISDN for different services,
each MSISDN is returned in a separate line.