Motorola HELLOMOTO W375 - Manual (Page 17)

44 basics
set up a text entry mode
To set your Primary and Secondary text entry
modes, press M > Entry Setup in a text entry
view and select Primary setup or Secondary setup.
iTAP ® mode
Press # in a text entry screen to switch to
iTAP mode. If you don't see j or p, press
M
> Entry Setup to set iTAP mode as your
primary or secondary text entry mode.
iTAP mode lets you enter words using one
keypress per letter. The iTAP software
combines your keypresses into common
words and predicts each word as you enter
it.
For example, if you press 7764, your
phone displays:
• If you want a different word (such as
Progress), continue pressing keypad
keys to enter the remaining
characters.
• Press 1 to enter punctuation or
other characters.
Press SELECT
key to enter
prog.
Press Delete
key to delete
last letter.
Message 765 ì h
4 ã? h xå
SELECT Delete
prog proh spoi
45 basics
tap mode
Press # in a text entry screen to switch to
TAP mode. If you do not see g or m, press
M
> Entry Setup to set TAP mode as your
Primary or Secondary text entry mode.
To enter text in TAP mode, press a keypad
key repeatedly to cycle through the letters
and number on the key. Repeat this step to
enter each letter.
For example, if you press 8 one time, your
phone displays:
After 2 seconds, the character is accepted
and the cursor moves to the next position.
numeric mode
In a text entry screen, press # to switch
entry modes until the 12 (numeric) indicator
is displayed.
Press keypad keys to enter the numbers you
want. When you finish entering numbers,
press # to switch to another entry mode.
symbol mode
In a text entry screen, press # to switch
entry modes until the @ (symbol) indicator is
displayed.
Press keypad keys repeatedly to cycle
through its symbols. Highlight the symbol
you want, then press SELECT.
TT
Press OK to
accept &
store text.
Press Delete to
erase the
character to
left of insertion
point.
Character
displays at
insertion
point.
OK Delete
Message 765 ì h
4 ã? h xå
46 basics
volume
You can adjust the earpiece speaker volume
while you are talking by pressing S right/
up to increase the volume or left/down to
decrease the volume. You can also adjust
the volume by pressing the side volume
keys.
Tip: During a call, you can set your phone to
mute by pressing M > Mute.
navigation key
Press the navigation key
S
up, down, left, or
right to scroll and
highlight options.
handsfree speaker
You can use your phone’s handsfree
speaker to make calls without holding the
phone to your ear.
During a call, press SPKR ON to turn the
handsfree speaker on. When your handsfree
speaker is on, you can press SPKR OFF to turn
it off.
Note: The handsfree speaker does not work
when your phone is connected to a
handsfree car kit or headset.
47 basics
codes & passwords
Your phone's unlock code is originally set to
1234. The security code is originally set to
000000. If your service provider didn't
change these codes, you should change
them:
Find it: Press M > Settings > Security
> New Passwords
You can also change your SIM PIN or call
barring passwords.
If you forget your unlock code: At the
Enter Unlock Code: prompt, try entering
1234
or the last four digits of your
phone number. If that doesn't work, press
M
and enter your security code instead.
If you forget your other codes: If you forget
your security code, SIM PIN code, PIN2
code, or call barring password, contact your
service provider.
check battery meter
To check your battery meter:
Press M > Settings > Phone Status
> Battery Meter.