Marantz SR4021 User Manual
Page 19
15
15
ENGLISH
MANUAL PRESET MEMORY
SPEAKERS
DISPLAY OFF
2
1
BASS
TREBLE
CLEAR
MEMORY
TUNER
CD
PHONO
MULTI JOG
RECEIVER SR4021
SLEEP
DIMMER
STANDBY
PHONES
WER ON/OFF
MEMORY
MULTI JOG
2. 4.
3.
2.
(Using the SR4021)
1.
Tune into the desired radio station. (See the
“MANUAL TUNING” or “AUTO TUNING”).
2.
Press the MEMORY button on the front panel.
“MEMORY” indicator blinks in the display.
3.
Select
the
preset number by turning the MULTI
JOG knob while it is still blinking. (approx. 5
second)
4.
Press the MEMORY button again to enter.
“MEMORY” indicator stops blinking and goes
out.
The
station is now stored in the specified
preset memory location.
(Using the remote control unit)
1.
Tune into the desired radio station. (See the
“MANUAL TUNING” or “AUTO TUNING”).
2.
Press the MEMO / PROG button on the remote
control unit. “MEMORY” indicator blinks in the
display.
3.
Enter the desired preset number by pressing
the numeric keypads.
Notes:
• When entering a single digit number (2 for example),
either input “02” or just input “2” and wait for a few
seconds.
• If a preset number already used is selected ,the
currently tuned station is stored with the preset
number and the formerly stored station with the
number is erased without any warning.
PRESET MEMORY
You can preset up to 30 AM/FM stations in any
order.
For each station, you can memorize the frequency
and reception mode if desired.
AUTO PRESET MEMORY
This function automatically scans the AM and FM
band and enters all stations with proper signal
strength into the memory.
RECORDER
F/P
BAND
BALANCE
SPEAKERS
2
SO
DI
SPEAKERS
DISPLAY OFF
2
1
BASS
TREBLE
VCR
T-MODE
CLEAR
AUTO TUNE
MEMORY
1
DVD
DSS
2
1
AUX
TUNER
CD
PHONO
DOWN
VOLUME
MULTI JOG
RECEIVER SR4021
LEEP
DIMMER
MUTE
ANDBY
PHONES
R ON/OFF
AUTO TUNE
BAND
CLEAR
MEMORY
4. 3. 1.
3.
1.
Select the FM band with the BAND button on
the front panel.
2.
Tune in the lowest receivable frequency.
3.
Press and hold down the MEMORY button
and AUTO TUNE button simutaneously, auto
presetting will start.
4.
Each time the tuner fi nds a station, the scanning
will pause and memory.
5.
Operation stops automatically when all 30
preset memory positions are fi lled or when auto
scanning attains the highest end of all bands.
To stop the auto preset function at anytime,
press the CLEAR button.
Note:
If Auto Presetting is interrupted by pressing the
CLEAR button, the memory which has already been
set is kept still.
PRESET SCAN
1.
3.
3.
(Using the remote control unit)
1.
Press the P.SCAN on the remote control unit.
The
preset station with the lowest preset
number is recalled fi rst.
2.
Preset stations are recalled in sequence (No. 1
→ No. 2 → etc.) for 5 seconds each.
No
stored preset number will be skipped.
3.
You can fast forward through the preset
stations by pressing the CHANNEL / SKIP
T continuously.
When the desired preset station is received,
cancel the preset scan operation by pressing
the CLEAR or P.SCAN.
RECALLING A PRESET STATION
RECORDER
F/P
BAND
BALANCE
SPEAKERS
DISPLAY OFF
2
1
BASS
TREBLE
CLEAR
MEMORY
2
1
AUX
TUNER
CD
PHONO
MULTI JOG
RECEIVER SR4021
SLEEP
DIMMER
STANDBY
PHONES
WER ON/OFF
MULTI JOG
F/P
1.
1.
1.
(Using the SR4021)
1.
Press the F/P button to show the preset station
on the display. Select the desired preset station
by turning the MULTI JOG knob on the front
panel.
(Using the remote control unit)
1.
Press the CHANNEL/SKIP
S or T button
to select the desired preset station, or input
the desired preset channel with the numeric
keypad on the remote control unit.