Marantz SR4021 - Manual (Page 20)

16 16
ENGLISH
CLEARING STORED PRESET STATIONS
You can remove preset stations from the memory
using the following procedure.
3. 2.
3. 2.
RECORDER
F/P BAND
BALANCE
SPEAKERS
DISPLAY OFF
2
1
BASS TREBLE
CLEAR MEMORY
2 1 AUX TUNER CD PHONO
ER SR4021
DIMMER
PHONES
CLEAR MEMORY
1. Recall the preset number to be cleared with the
method described in “RECALLING A PRESET
STATION”.
2. Press the MEMORY button on the front panel
or MEMO/PROG. button on the remote control
unit.
3. “MEMORY” indicator blinks in the display for
5 seconds. While blinking, press the CLEAR
button on the front panel or press the CLEAR
button on the remote control unit.
4. “CLEAR” appears on the display to indicate
that the specified preset number has been
cleared.
NAME INPUT OF THE PRESET STATION
This function allows the name of each preset channel
to be entered using alphanumeric characters.
Before inputting names, you need to store preset
stations with the preset memory operation.
SPEAKERS
DISPLAY OFF
2
1
BASS TREBLE
CLEAR MEMORY
TUNER CD PHONO
MULTI JOG RECEIVER SR4021
SLEEP DIMMER
STANDBY
PHONES POWER ON/OFF
CLEAR MEMORY
MULTI JOG
4. 3. 2. 5. 6.
4. 2.
5.
1. Recall the desired preset number with the
method described in “RECALLING A PRESET
STATION”.
2. Press the MEMORY button on the front panel
or press the MEMO / PROG. button on the
remote for more than 3 seconds.
3. The left most column of the station name
indicator fl ashes, indicating the character entry
ready status.
4. When turn the MULTI JOG knob on the front
panel, alphabetic and numeric characters will
be displayed in the following order:
A → B → C ...Z → 1 → 2 → 3..... 0 → – → + →
/ → (Blank)
→ A
Clockwise →
← Counter clockwise
Numeric keypad Display
1 A → B → C → 1 → A
2 D → E → F → 2 → D
3 G → H → I → 3 → G
4 J → K → L → 4 → J
5 M → N → O → 5 → M
6 P → Q → R → 6 → P
7 S → T → U → 7 → S
8 V → W → X → 8 → V
9 Y → Z → space → 9 → Y
0 – → + → / → 0
5. After selecting the fi rst character to be entered,
press the MEMORY button on the front panel
or press MEMO/PROG. button on the remote.
The entry in this column is fi xed and the next
column starts to flash. Fill the next column
using the same method.
Note:
Unused columns should be fi lled by entering blanks.
6. To save the name, press the MEMORY button
for more than 3 seconds to confi rm the entry.
RDS OPERATION
Now in use in many countries, RDS (Radio Data
System) is a description of the station’s programming
hidden space in the FM signal.
Your new receiver is equipped with RDS to assist
in the selection of FM stations using station and
network names, rather than broadcast frequencies.
Additional RDS functions include the ability to search
for programme types.
RADIO TEXT
Some RDS stations broadcast RADIO TEXT, which is
additional information on the station and programme
being broadcast.
RADIO TEXT information appears as ‘running’ text
in the display. RADIO TEXT is transmitted character
by the radio station. As a result of that it may take
some time until the entire text has been completely
received.
RDS DISPLAY
When a receiver is tuned to an FM station that is
transmitting RDS data, the Front Panel Information
Display will automatically show the station name or
RADIO TEXT in place of the typical display of the
station’s broadcast frequency.
To change the display, press the T-DISP button on
the remote.
RT (RADIO TEXT) PS (Program Service Name) Frequency
PROGRAMME TYPE (PTY) DISPLAY
The RDS system categorizes programmes according
to their genre into different programme type (PTY)
groups. To display the programme type information
of the current station, press the PTY button in the
TUNER MODE on the remote.
PTY AUTO SEARCH
Your receiver is equipped to automatically search for
stations transmitting any of 29 different programme
types. To search for a PTY, follow these procedures:
1. 3. 4. 2.
1. Press the PTY button in the TUNER MODE on
the remote. The current station’s PTY will be
displayed, or the currently selected PTY group
will be displayed in blinking if no station or RDS
data is present.
2. To change to a new PTY type, press the
CHANNEL/SKIP S or T button on the
remote until the desired PTY is shown in the
display.