Master Bilt IM-45G - Manual (Page 6)

6
3. Electrical: Inspect each month all power harnesses for any cracks, abrasions or damage to
connection plugs. Replace any defective wiring or harnesses.
4. Door(s): Inspect each month for component wear, function and secure attachment.
A. Gasket(s) should be examined for tears or any other problems that would cause loss of seal.
Replace torn/worn gaskets to maintain correct temperature and refrigeration efficiency.
B. Hinges exposed to harsh environmental conditions may require a lubricant for ease of
operation. Spray a light penetrating oil on hinge pivot points to ease the work load and
extend life of hinge. Tighten any loose screws.