Marantz PD6140D - Manual (Page 28)

21
Adjusting the colors
Use this procedure to adjust hue and color density for red,
green, blue, yellow, magenta and cyan.
You can accentuate the green color of trees, the blue of
the sky, etc.
Example: Adjusting the color tune for blue
Set “ADVANCED OSM” to “ON” in the MAIN MENU
(1/2), then perform the following operations.
1. On the MAIN MENU, select “PICTURE”, then press
the MENU/ENTER button.
The “PICTURE” screen appears.
2. Use the ▲ and ▼ buttons to select “COLOR TUNE”,
then press the MENU/ENTER button.
The “COLOR TUNE” screen appears.
3. Use the ▲ and ▼ buttons to select “BLUE”.
4. Adjust using the ᮤ and ᮣ buttons.
COLOR TUNE
EXIT
RED
GREEN
BLUE
YELLOW
MAGENTA
CYAN
RESET : OFF
SEL. RETURN ADJ.
* If neither the ᮤ or ᮣ button is pressed within 5 seconds,
the current selection is set and the previous screen
reappears.
To continue making other adjustments...
Repeat from step 3.
Information
Ⅵ
COLOR TUNE settings
RED ................ Makes red’s adjustment
GREEN ........... Makes green’s adjustment
BLUE ............... Makes blue’s adjustment
YELLOW ......... Makes yellow’s adjustment
MAGENTA ...... Makes magenta’s adjustment
CYAN .............. Makes cyan’s adjustment
RESET ............ Resets settings to the factory default
value. Use
ᮤ and ᮣ buttons to select
“ON”, then press the MENU/ENTER
button.
Ⅵ
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
Audio Settings Menu
Adjusting the treble, bass and left/right
balance and audio input select
The treble, bass and left/right balance can be adjusted to
suit your tastes.
Example: Adjusting the bass
1. On the MAIN MENU, select “AUDIO”, then press
the MENU/ENTER button.
The “AUDIO” screen appears.
2. To adjust the bass ...
Use the ▲ and ▼ buttons to select “BASS”.
3. Adjust the bass using the ᮤ and ᮣ buttons.
AUDIO
EXIT
BASS
TREBLE
BALANCE
AUDIO INPUT1
AUDIO INPUT2
AUDIO INPUT3
: VIDEO1
: HD/DVD1
: RGB1
SEL. RETURN ADJ.
To continue adjusting the audio ...
Repeat from step 2.
Note : If “CAN NOT ADJUST” appears...
Set “AUDIO INPUT” on the AUDIO menu correctly.
Information
Ⅵ
Audio settings menu
BASS .............. Controls the level of low frequency
sound.
TREBLE .......... Controls the level of high frequency
sound.
BALANCE ....... Controls the balance of the left and
right channels.
Ⅵ Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.