Marantz PD6140D - Manual (Page 35)

28
ORBITER
Use this to set the picture shift.
Example: Setting “ORBITER” to “AUTO1”
Perform Steps 1-2 of LONG LIFE, then...
3. Use the ▲ and ▼ buttons to select “ORBITER”.
4. Use the ᮤ and ᮣ buttons to select “AUTO1”.
The mode switches as follows each time the ᮤ or ᮣ
button is pressed:
→ OFF ↔ AUTO1 ↔ AUTO2 ↔ MANUAL ←
LONG LIFE
EXIT
PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
: AUTO
: AUTO1
: OFF
: OFF
: OFF
SEL. RETURN ADJ.
Information
Ⅵ ORBITER settings
OFF .............. Orbiter mode does not function.
This is the default setting when RGB is
input.
AUTO1 ......... The picture moves around the screen
intermittently, making the picture
smaller. This is the default setting when
a Video or a DVD/HD/DTV singnal is
input. Set to “OFF” when these signals
are not used.
AUTO2 ......... The picture moves around the screen
intermittently, making the picture
bigger.
MANUAL ...... User can adjust the orbiter function
(Horizontal Dot, Vertical Line and
Time) manually.
See the following explanation.
* When a Video or a DVD/HD/DTV singnal is input, the
AUTO1 and 2 functions will affect only the moving
picture and will not make the screen smaller or bigger.
Adjust the ORBITER function manually
Set the amount of shift and the time between movement.
Example: Setting so that the picture moves 2 dots
horizontally and 3 lines vertically every 3 minutes.
Perform Steps 1-3 of ORBITER, then...
4. Use the ᮤ and ᮣ buttons to select “MANUAL”, then
press the MENU/ENTER button.
THE “ORBITER” screen appears.
5. Adjust the items using the ▲▼ ᮤ and ᮣ buttons.
The mode switches as follows each time the ᮤ or ᮣ
button is pressed:
INVERSE
Use this to set the inverse mode or to display a white
screen.
Example: Setting “INVERSE” to “WHITE”
Perform Steps 1-2 of LONG LIFE, then...
3. Use the ▲ and ▼ buttons to select “INVERSE”.
4. Use the ᮤ and ᮣ buttons to select “WHITE”.
The mode switches as follows each time the ᮤ or ᮣ
button is pressed:
→
OFF
↔
ON
↔
WHITE
←
LONG LIFE
EXIT
PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
: AUTO
: OFF
: WHITE
: OFF
: OFF
SEL. RETURN ADJ.
Information
Ⅵ
INVERSE Settings
ON ......... The picture is displayed alternately between
positive image and negative image.
You can set the time by pressing the MENU/
ENTER button while “ON” is set.
OFF ....... Inverse mode does not function.
WHITE ... The entire screen turns white.
You can set the time by pressing the MENU/
ENTER button while “ON” is set.
• H-DOT
→
1 DOT
↔
2 DOT
↔
.....
↔
19 DOT
↔
20 DOT
←
• V-LINE
→
1 LINE
↔
2 LINE
↔
.....
↔
19 LINE
↔
20 LINE
←
• TIME
→ 1 M ↔ 2 M ↔ 3 M ↔ 4 M ↔ 5 M ←
ORBITER
EXIT
H-DOT
V-LINE
TIME
: 2 DOT
: 4 LINE
: 3 M
SEL. RETURN ADJ.
Information
Ⅵ ORBITER Function settings
H-DOT .......... Moves from 1 to 20 dots in the
horizontal direction.
V-LINE .......... Moves from 1 to 20 lines in the vertical
direction.
TIME ............ Interval of 1~5 minutes (1 horizontal
dot or 1 vertical line per interval).
LOCK1, 2, 3 .... Sets maximum brightness.
The brightness level decreases in the
order of LOCK 1, 2, 3. LOCK 3
provides minimum brightness.