Motorola and V.32bis User Manual

Page 54

Advertising
background image

3-4 Getting Started

G

e

tt

ing Start

e

d

Front Panel Display

The front panel has a 16-character alphanumeric LCD display (see Figure 3-2 or
3-3). You access the configuration menu tree through this display, to:

• Configure the modem
• Store and view telephone numbers
• Initiate and answer calls
• View status information
• Run online tests
• Enter passwords and network addresses

CD

Data Carrier
Detect

On when the local modem receives a carrier signal (as
defined by the current modulation mode) from the remote
modem or when the DCD parameter=High.

TR

Data Terminal
Ready

On when a DTR signal from a terminal is detected.

RC/NC

Remote Control/
Network Control

Flashes to indicate that the modem is under remote
configuration (via front panel or AT ACU).

On when the modem is under NMS control.

A/B

A or B

Enclosure cards only.

On when modem A front panel information is displayed.

Off when modem B front panel information is displayed.

To toggle between modem A and modem B front panels, hold

and then press

.

ALM

Alarm

Enclosure cards only.

On when a test is in progress or a modem failure occurs. With
the 3262/3267 Modem card, if one modem fails, the ALM
LED lights and remains lit regardless of which modem front
panel is being viewed.

Table 3-1.
326X LEDs

LED

Name

Description

Advertising
This manual is related to the following products: