Miele KF 7544 - Manual (Page 11)

Before using for the first time
The stainless steel surface has a pro-
tective cover to prevent scratching dur-
ing transportation.
^ Do not remove this cover until the ap-
pliance has been installed or built in.
Start at one of the upper corners.
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid and then dry
with a soft cloth.
Important: To ensure correct func-
tioning of the appliance, let it stand
for between ½ and 1 hour after
transporting it to its final location be-
fore connecting it to the mains.
Switching on
The refrigerator and freezer sections
are switched on together by pressing
the main switch or by pressing the on
button on the left hand side of the con-
trol panel.
^ Press the main switch.
Bars will light up in the temperature dis-
play and a buzzer will sound. The appli-
ance starts cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is suffi-
ciently low.
Switching off
^ Press the main switch.
The temperature display goes out and
the cooling process is switched off. If
this does not happen, then the safety
lock is still engaged.
To switch the refrigerator section off
separately
The refrigerator section can be
switched off without having to switch off
the freezer section. This is useful e.g.
whilst on holiday.
^ Press the On/Off button for the refrig-
erator section.
The temperature display for the re-
frigerator section goes out and the
refrigerator section switches off.
Switching on and off
11