Ventilation gaps 29, Door seals 29, Metal grille at the back of the appliance 29 – Miele KF 7544 User Manual

Page 29: Cleaning and care, Ventilation gaps, Door seals, Metal grille at the back of the appliance, After cleaning

Advertising
background image

Ventilation gaps

^ The ventilation gaps should be

cleaned on a regular basis with a
brush or vacuum cleaner. A build up
of dust will increase the appliances
energy consumption.

Door seals

Do not use any grease or oil on the
door seals as these will cause the
seals to deteriorate and become po-
rous over time.

The door seals should be cleaned reg-
ularly with clean water and then wiped
dry with a soft cloth.

Metal grille at the back of the
appliance

The metal grille at the back of the appli-
ance (heat exchanger) should be
dusted at least once a year. A build up
of dust will increase the energy con-
sumption of the appliance.

When cleaning the grille, make sure
that the pipework and other compo-
nents do not get broken or damaged
in any way.

After cleaning

^ Replace all shelves and accessories

in the refrigerator section.

^ Place food back in the refrigerator

section, close the appliance doors,
and switch the refrigerator section
and the freezer section on.

^ Switch on the super freeze function

so that the freezer section can cool
down quickly. The super freeze indi-
cator light will come on.

^ Once the temperature in the freezer

has reached the required tempera-
ture place the food back in the
freezer drawers and place them back
in the freezer.

^ Switch off the super freeze function

with the super freeze button. The in-
dicator light will go out.

Cleaning and care

29

Advertising