Minicom Advanced Systems CAT5 - Manual (Page 19)

USER GUIDE
18
23. F7 Defaults
Press F7 to return the OSD to the factory default settings. Note! All changes made
will be removed.
24. The Ports settings
From the General Settings, return to the Settings window by pressing Esc. Navigate to
the Ports line and press Enter. The Ports settings window appears see Figure 14.
Figure 14 Ports Settings window
Editing the computer name
In this window you can edit the computer names with up to 15 characters. When you
have a cascaded CAT5 KVM Switch connected to a Computer port give the switch a
distinct name. See Figure 14.
To erase a character:
Select it and press the Spacebar. Blank spaces remain in place of the erased character.
To erase an entire line:
Place the cursor at the beginning of the line. Keep the Spacebar depressed until the
line is erased.
Keyboard (KB)
By default the Keyboard mode is set to PS, which is suitable for Windows, Linux,
MAC OS, SUN Solaris and most other operating systems.
For certain UNIX operating systems set the KB column as follows:
· U1 for HP UX
· U2 for Alpha UNIX, SGI, Open VMS
· U3 for IBM AIX