Minicom Advanced Systems CAT5 - Manual (Page 22)

SMART CAT5 SWITCH
21
27. Security
In the Settings window navigate to the Security line and press Enter. The Security
settings window appears see Figure 17.
Figure 17 The Security settings window
The ‘T’ column on the right hand side stands for Type of password.
There can only be 1 Administrator password, 1 Supervisor password, and 6 User
passwords.
To change a user name or password:
1. Navigate to the desired line and column.
2. Type a new user name / password. User authentication is done solely via the
password there is no security significance to the names.
By default the User Profile settings are full access.
28. The OSD HELP window – F1
To access the HELP window press F1. The HELP window appears see Figure 18.
Figure 18 The HELP window