Re-setting the grease filter timer 16, Cleaning and care, Re-setting the grease filter timer – Miele DA5000D User Manual

Page 16

Advertising
background image

Depending on the detergent,
cleaning the grease filters in a
dishwasher may cause permanent
discoloration of the filter surface.
Performance of the filter is not
affected by this discoloration.

^ After cleaning, the filters can be

placed on a towel to air dry.

^ While the filters are removed, clean

any dirt or grease from the filter
casing.

^ There is a groove on both sides of

the canopy, to collect grease. These
grooves and the retainers for the
grease filter should be cleaned every
time the filter itself is cleaned.

^ Put the grease filters back in place.
^ Touch any sensor button from "1" to

"4". The fan turns back on.

Re-setting the grease filter
timer

Each time you clean the grease filter,
also re-set the counter.

^ Touch the "s" sensor button to turn

on the fan.

^ Press and hold the "l" sensor button

for approx. 3 seconds, until only the
sensor button "1" is flashing.
The light for sensor button "

l" will go

out.

If you clean the grease filter before the
counter reaches the maximum number
of hours:

^ Press and hold the "l" sensor button

for approx. 6 seconds, until only
sensor button "1" is flashing.

Cleaning and care

16

Advertising