Miele DA5000D - Manual (Page 17)

Changing the halogen light
bulbs
To change the halogen bulbs, first open
the canopy.
^ Touch the "s" sensor button.
The fan turns on to level "2".
The canopy opens.
^ Press and hold the "2" sensor button
for approx. 5 seconds, until the fan
turns off. The canopy remains open.
,WARNING
TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
Before changing the light bulbs,
disconnect the hood from the power
supply, see "Important Safety
Instructions".
^ Remove the grease filter from the
appliance, see "Cleaning and care /
Grease filter".
When in use halogen bulbs become
extremely hot, use caution. Do not
attempt to change the bulbs until
they have had sufficient time to cool.
Do not touch the bulb surface.
Fingerprints or body oils deposited
on the bulb will decrease its life.
Follow the bulb manufacturer’s
instructions.
^ Through the opening above the light,
press the lighting unit slightly
downward.
^ Then turn the halogen light to the left
to remove it from the fixture.
Use the same bulb type (GU/GZ 10,
120 V 50 W) as a replacement.
^ Screw the new halogen bulb into the
fixture and press it upward.
^ Put the grease filter back in place.
^ Re-connect the exhaust hood to the
power supply.
The canopy will now close.
Cleaning and care
17