Motorola Bluetooth Wireless Hands Free - Manual (Page 19)

17
Training Quick Reference
1 Set phone keypad tones to normal tones. (Refer to phone user’s guide for information
about defining keypad tones.)
If Bluetooth Button
E does not flash, press it to establish a Bluetooth link.
2 Press, hold Voice Recognition Button until it flashes.
3 Train car kit by using commands described below.
4 Exit Training Mode: Press, release Voice Recognition Button.
Record Key Word Related Information
H
# 2 #
F Say a name (speak clearly)
G Motorola (for example)
F Repeat
G Motorola
F Motorola stored
F Repeat (confirm first entry or when car
kit cannot distinguish key word)
F Aborting (if nothing said for 10 seconds)
Note: Turn off vehicle to reduce noise while
recording.
Record Name Related Information
H
# 8 #
F Say a name (speak clearly)
G John Smith
F Repeat
G John Smith
F Press the number, star to end
H
number to store, then *
F John Smith Stored
F Repeat (when car kit cannot distinguish
key word)
F Aborting (if nothing said for 10 seconds)
F Memory full (if more than 30 names
stored or 30 s. recorded)
H
C (clear last digit—not on all phones)
H
C (press and hold to erase phone
number and cancel)
Note: Turn off vehicle to reduce noise while
recording.
Delete/Browse Related Information
H
# 3 #
F Say a name, press 9 to delete
G John Smith (name you want to delete)
F John Smith, press 9 to delete
G
9 (John Smith name and phone number
deleted)
H
# (hear next name)
* (hear previous name)
F Aborting (if nothing said for 10 seconds)
Note: Turn off vehicle to reduce noise while
recording.
Key Word On/Off Related Information
H
# 6 #
F On
H
# 6 #
F Off
Key to Symbols
H
Press the following
key(s) or enter the
following information
F
Car kit says ...
G
You say ...