MITSUBISHI ELECTRIC 700 Series - Manual (Page 133)

128
Sequence Instructions
2) Program that resets the data register contents to 0.
3) Program that resets the 100ms retentive timer and counter.
Stores X10 to 1F contents into D8 when X0
turns on.
Resets D8 contents to 0 when X5 turns on.
Coding
When T5 is set as retentive timer, T5 turns on
when ON period of X4 reaches 30 minutes.
Counts the number of times T5 turned on.
Resets T5 when T5 turns on.
When C0 stops counting, Y5 turns on.
When X5 turns on, C0 is reset.
・ Coding