Miele CS1012 - Manual (Page 17)

Burners
The burner can be dismantled and
cleaned when cool.
^ Remove the burner parts and wash
them in a solution of warm water and
liquid dish soap. Dry them
thoroughly. Make sure that the flame
holes are clean and completely dry.
^ Wipe the burner base clean with a
damp cloth and then dry.
^ Gently wipe the ignitor and ignition
safety control with a slightly damp
cloth, and then wipe dry.
Make sure that no liquid gets into
the appliance.
Reassembling the burner
^ Place the burner head o onto the
burner base r, making sure that the
thermocouple p and the ignitor q
align through the holes in the burner
head. The burner head must fit into
place properly.
^ Place the burner cap n evenly onto
the burner head o.
Once the burner cap is in the right
position, it will not move.
Be careful not to mix up the parts.
Cleaning and care
17