Miele CS1012 - Manual (Page 29)

Cut out
^ Make the countertop cut-out for the
desired number of appliances.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the left or right of the
combiset.
See also the "IMPORTANT SAFETY
INSTRUCTIONS".
^ Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture.
The materials used must be heat
resistant.
If during installation the seal around the
frame does not sit flush with the
countertop in the corners, the corner
radius, maximum
3
/
16
" (4 mm), can be
carefully filed down to fit.
Installation
29