Mitel 3300 IP 5312 IP - Manual (Page 28)

5312/5324 IP Phones User Guide
- 20 -
• NA–Int redirects internal calls after several rings if you don't answer.
• NA–Ext redirects external calls after several rings if you don't answer.
Note: For information about "I'm Here?", see Call Forward – Remote.
To program Call Forward:
1. Press (MENU).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey .
4. Press # or the Next softkey until the type of Call Forward that you want to set up
appears (see above).
5. On a 5324 IP Phone only, press * or the Review softkey.
6. If a number is already programmed, press * or the Change softkey .
7. Press * or the Program softkey .
8. Dial the destination number.
If you make an error while dialing, press * or the Å softkey to correct errors.
9. Press (DOWN) or the Save softkey.
To turn Call Forward on and off (once it has been programmed):
1. Press (MENU).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey .
4. Press # or the Next softkey until the type of Call Forward appears. .
5. Do one of the following:
• On a 5312 IP Phone, press * (Change) and then press # (TurnOff/TurnOn)
• On a 5324 IP Phone, press the Review softkey. Press the Change softkey.
• To turn Call Forward on, press the TurnOn softkey, or, to turn Call Forward off,
press the TurnOff softkey.