Mitel 3300 IP 5312 IP - Manual (Page 32)

5312/5324 IP Phones User Guide
- 24 -
2. If a password is required, dial your password (and press the Enter softkey if
available).
3. Press the Yes softkey, and do one or all of the following:
• To display the time the message was sent, press the More softkey.
• To display the number of the caller, press the More softkey twice.
• To call the message sender, press the Call softkey.
• To delete the message, press the Erase softkey.
• To view the next message, press
(MESSAGE).
On a 5324 IP Phone only, you can set, change, or clear a password (up to 7 digits, not
including 0):
1. Press (MENU).
2. Press the No softkey until "Set Password?" appears.
3. Press the Yes softkey.
4. Do one of the following:
• To enter a new password, enter your password.
• To change or clear your password, enter your current password.
5. Press the Enter softkey.
6. When changing or clearing your password, do one of the following:
• To change your password, enter your new password and press the Enter softkey.
• To clear your password, enter 0.
7. Enter your new password again.
8. If you are setting up or changing a password, press the Enter softkey.
9. Press (MENU).