Multi-Tech Systems MT5634ZPX-PCI-U/NV - Manual (Page 8)

MultiModemZPX Quick Start Guide
8
4. The Multi-Tech Systems NT4 PCI Modem Setup dialog box shows
the COM port assigned to the modem. You can change the COM port
assignment by clicking the down arrow and selecting an available
COM port.
5. Now click Install. The MultiModemZPX driver is installed on the se-
lected COM port.
6. When a message asking you to restart the computer appears,
remove the CD from the CD-ROM drive, and then click OK to
restart the computer.