Motorola MOTONAV T815 - Manual (Page 16)

16
Release
Button
Release
Button
Rubber
Strap
3. Velcro mount: Locate the rectangular Velcro patch (supplied). Remove the protective backing
from one side of the patch and press the patch to the bottom of the UPH. Remove the remaining
protective backing and press the UPH to the desired spot. The UPH can then be removed by
separating the Velcro patch.
To insert a phone into the UPH: Push the side release button to expand the side
grippers to their maximum reach. Insert your phone, and gently squeeze the side
grippers until the soft rubber edges grip the phone. Check all of the grippers to see if
they are interfering with any phone buttons. The bottom grippers are movable to fit
around any phone feature that gets in the way. If needed, the bottom grippers can
be removed and re-inserted on the top, and the whole UPH flipped upside down.
Check again for button interference and choose the direction that fits best. There is
a separate, small rubber strap that can then be inserted into the bottom gripper slot
to hold the bottom grippers in place.
Option 1 Option 2
UPH Mounting