Technical speci- fications, Dimensions – Marantz SR5400U User Manual

Page 32

Advertising
background image

29

ENGLISH

ENGLISH

TECHNICAL SPECI-
FICATIONS

FM TUNER SECTION

Frequency Range ................................ 87.5 - 108.0 MHz
Usable Sensitivity ............................ IHF 1.8

µV/16.4 dBf

Signal to Noise Ratio ................... Mono/Stereo 75/70 dB
Distortion .................................... Mono/Stereo 0.2/0.3 %
Stereo Separation ....................................... 1 kHz 45 dB
Alternate Channel Selectivity ...............

± 300 kHz 60 dB

Image Rejection ....................................... 98 MHz 70 dB
Tuner Output Level ........... 1 kHz,

± 75 kHz Dev 800 mV

AM TUNER SECTION

Frequency Range .................................... 520 - 1710 kHz
Signal to Noise Ratio .............................................. 50 dB
Usable Sensitivity ......................................... Loop 400

µV

Distortion ................................. 400Hz, 30 % Mod. 0.5 %
Selectivity ...............................................

± 20 kHz 70 dB

AUDIO SECTION

Power Output (20 Hz - 20 kHz/THD=0.08%)
Front L&R ........................................... 8 ohms 90 W / Ch
Center ................................................ 8 ohms 90 W / Ch
Surround L&R .................................... 8 ohms 90 W / Ch
Surround Back ................................... 8 ohms 90 W / Ch

Front L&R ......................................... 6 ohms 110 W / Ch
Center .............................................. 6 ohms 110 W / Ch
Surround L&R .................................. 6 ohms 110 W / Ch
Surround Back ................................. 6 ohms 110 W / Ch

Input Sensitivity/Impedance .............. 168mV/ 47 Kohms
Signal to Noise Ratio(Analog Input / Source Direct) ... 105 dB
Frequency Response

(Analog Input / Source Direct)

.......................................... 8 Hz - 100 kHz (

± 3 dB)

(Digital Input / 96 kHz PCM) ... 8 Hz - 45 kHz (

± 3 dB)

VIDEO

Television Format .................................................. NTSC
Input Level/Impedance ........................... 1 Vp-p/75 ohms
Output Level/Impedance ........................ 1 Vp-p/75 ohms
Video Frequency Response ....... 5 Hz to 8 MHz (– 1 dB)
Video Frequency (Component) ... 5 Hz to 80 MHz (– 1 dB)
S/N ......................................................................... 60 dB

GENERAL

Power Requirement .............................. AC 120 V 60 Hz
Power Consumption .............................................. 400 W
Weight ................................................. 27.6 lbs (12.5 Kg)

ACCESSORIES

Remote Control Unit RC5400SR .................................. 1
AAA-size batteries ........................................................ 2
FM Feeder Antenna ...................................................... 1
FM Antenna Converter .................................................. 1
AM Loop Antenna ......................................................... 1

Specifications subject to change without prior notice.

AV SURROUND RECEIVER SR5400

UP

SELECTOR

VOLUME

DOWN

MEMORY

TUNING

MODE

CLEAR

MUTE

POWER ON/STANDBY

PHONES

ENTER

STANDBY

AUX INPUT

S-VIDEO

VIDEO

L

AUDIO

R

ATT

SELECT

DSS/VCR2

AUX

VCR1

DVD

TV

CD

CD-R

TAPE

TUNER

S-DIRECT

DISPLAY

A/D

6.1CH INPUT

VIDEO OFF

F/P

162.3 mm

16.3 mm

146 mm

17-5/16 ins. (440 mm)

20 mm

5/8 ins.

5-3/4 ins.

1 in.

6-3/8 ins.

13/16 ins.

16-7/16 ins.

18-1/4 ins.

25 mm

418 mm

463 mm

DIMENSIONS

GENERAL MALFUNCTION
If the equipment malfunctions, this may be
because an electrostatic discharge or AC line
interference has corrupted the information in the
equipment memory circuits. Therefore:

-

disconnect the plug from the AC line supply

-

after waiting at least three minutes, reconnect
the plug to the AC line supply

-

re-attempt to operate the equipment

HOW TO RESET THE UNIT

Should the operation or display seem to be
abnormal, reset the unit with the following
procedure.
The SR5400 is turned on, press and hold the
SELECT and ATT buttons simultaneously for 3
seconds or more.
Remember that the procedure will reset the
settings of the function selector, Surround mode,
delay time, TUNER PRESET etc., to their initial
settings.

Memory backup

• In case a power outage occurs or the power

cord is accidentally unplugged, the SR5400
is equipped with a backup function to
prevent memory data such as the preset
memory from being erased.

AV SURROUND RECEIVER SR5400

UP

SELECTOR

VOLUME

DOWN

MEMORY

TUNING

MODE

CLEAR

MUTE

POWER ON/STANDBY

PHONES

ENTER

STANDBY

AUX INPUT

S-VIDEO

VIDEO

L

AUDIO

R

ATT

SELECT

DSS/VCR2

AUX

VCR1

DVD

TV

CD

CD-R

TAPE

TUNER

S-DIRECT

DISPLAY

A/D

6.1CH INPUT

VIDEO OFF

F/P

Advertising
This manual is related to the following products: