Marantz SR5400U User Manual
Page 8
5
ENGLISH
DISP
AUTO
TUNED
ST
V – OFF
NIGHT
PEAK
ANALOG
DIGITAL
ATT
SLEEP
SURR
AUTO
DIRECT
DISC 6.1
MT X 6.1
EQ
DIGITAL
SURROUND
PCM
L
C
R
SL
S
SR
LFE
¡6
¡5
f
s
a
¡4
g
j k ¡0
¡2
d
h
l ¡1
¡3
FL DISPLAY
a
DISP (Display Off) indicator
This indicator is illuminated when the SR5400 is in
the display off condition.
s
SLEEP timer indicator
This indicator is illuminated when the sleep timer
function is in use.
d
AUTO SURR (Auto Surround mode)
indicator
This indicator illuminates to show that the AUTO
SURROUND mode is in use.
f
TUNER’s indicators
AUTO :
This indicator illuminates when the
tuner’s Auto mode is in use.
TUNED :
This indicator illuminates when a
station is being received with
sufficient signal strength to provide
acceptable listening quality.
ST(Stereo) :
This indicator illuminates when an
FM station is being tuned into stereo.
g
DTS-ES mode indicators (DISC6.1,
MTX6.1)
These indicators will illuminate to show the DTS-
ES decoding mode (Discrete 6.1 or Matrix 6.1).
h
V (video)-OFF mode indicator
This indicator is illuminated when the Video-OFF
function is active.
j
NIGHT mode indicator
This indicator is illuminated when the SR5400 is in
the Night mode, which reduces the dynamic range
of digital program material at low volume levels.
k
PEAK indicator
This indicator is a monitor for an analog audio input
signal. If the selected analog audio input signal is
greater than the capable level of internal processing,
this will illuminate. If this happens, you should press
the
ATT
button.
l
EQ mode indicator
This indicator is illuminated when the HT-EQ
function is active.
¡0
ATT (Attenuation) indicator
This indicator is illuminated when the attenuation
function is active.
¡1
DIGITAL Input Indicator
This indicator is illuminated when a digital input has
been selected.
¡2
ANALOG input indicator
This indicator is illuminated when an analog input
source has been selected.
¡3
SIGNAL FORMAT indicators
2
DIGITAL, EX, 2
SURROUND, dts, ES, 96/24,
PCM
When the selected input is a digital source, some
of these indicators will be illuminated to display the
specific type of signal in use.
¡4
ENCODED CHANNEL STATUS
indicators
These indicators display the channels that are
encoded with a digital input signal. If the selected
digital input signal is Dolby Digital 5.1ch or DTS
5.1ch, “L”, “C”, “R”, “SL”, “SR” and “LFE” will be
illuminated. If the digital input signal is 2 channel
PCM-audio, “L” and “R” will be displayed.
If Dolby Digital 5.1ch signal with Surround EX flag
or DTS-ES signal comes in, “L”, “C”, “R”, “SL”, “S” ,
“SR” and “LFE” will be illuminated.
¡5
Main Information Display
This display shows messages relating to the
status, input source, surround mode, tuner,
volume level or other aspects of unit’s operation.
¡6
DIRECT (Source direct) indicator
This indicator is illuminated when the SR5400 is in
the SOURCE DIRECT mode.