M-AUDIO 1010LT - Manual (Page 42)

9. In the Mixer Input column labeled "WavOut 1/2," click on each fader handle
and drag it up to the 0dB setting. Also, deactivate (uncheck) each WavOut 1/2
mute box to unmute the channels. This will allow us, once we’ve recorded
into a music software program, to hear those software outputs upon playback.
10. Using the scroll bar at the bottom of the control panel, scroll to the right until
you see the column labeled "H/W In 1/2." Test mic #1, and you should see an
indication in the left meter, which represents signal levels from the Delta
analog input 1. Test mic #2, and you should see an indication in the right
meter, which represents signal levels from Delta hardware input 2.
42