Morphy Richards 29000 - Manual (Page 12)

Listening to the radio
1 Press the power ON button (29).
2 Slide the function selector switch (19) to the RADIO position, switch
the BAND selector switch (27) and switch to mono or stereo using the
selector switch (25).
3 Turn the tuning control (11) and tune to the desired station.
4 Adjust the volume control (18) to the desired level.
(If the FM station is being received in stereo the STEREO indicator (5) will
light).
5 Press the power OFF button (30) to turn the radio off.
To obtain the maximum reception fully extend the wire FM aerial (which is
located at the rear of the unit)and alter the direction of the wire for best
results.
The aerial for the MW waveband is located inside the unit. To obtain, the
maximum MW reception rotate your CD clock radio.
11