Morphy Richards 29000 - Manual (Page 5)

4
Electrical requirements
Check the voltage on the rating plate of your CD player corresponds with
your house electricity supply which must be A.C. (Alternating current).
For CD players with a fitted plug
If the socket outlets in your home are not suitable for the plug supplied with
this appliance the plug should be removed and the appropriate one fitted.
IMP0RTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED,
MUST BE DESTROYED AS A PLUG WITH A BARED FLEXIBLE CORD IS
HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET.
Should the fuse in the 13 amp plug require changing a 3 amp BS1362 fuse
must be fitted.
If in doubt, consult a qualified electrician.
Battery back-up facility
(will operate without a battery fitted)
Your CD player is equipped with a battery back-up facility.
1 Remove the battery compartment cover (20) (located underneath the
unit) by sliding in the direction of the arrow.
2 Insert a battery size 9 volts PP3/6LR61 (Ensure the battery is inserted
correctly)
3 Replace the battery compartment cover.
Should a power interruption occur the clock will continue to run, however, time
keeping will not be accurate. The display will be extinguished to conserve
battery life but the memory will retain details of the clock time and alarm
settings.
Battery back-up is designed to operate for a short period only.
If the unit is not to be used for a prolonged period, remove the battery to
avoid battery leakage.
In the interests of environmental safety:dispose of batteries safely.