Multitech IWAY MT128ISA-SV - Manual (Page 46)

46-IWay Hopper
Installation
details for your ISP. Click “Next >” and select IINWANNT and click “Next
>”. Enter the phone number of ISP and click “Next”. Click “Finish”. You
will get a window like below.
Figure 2-32. Configure Dial-Up Networking
2. To configure server settings or dialing properties, click on the “More” button
and select the item you want to change from the pull down list. Click “Dial”
to make a connection with server over ISDN. To compare with Windows95
Dial-Up Networking, these parameters (phone number, dial using port, server
type, and security) are located in the item “Edit entry and modem properties..”
when click on the “More” button. In the “Security” sub-window, check that
you have enabled “Accept any authentication including clear text”.
3. If you want to use Multilink PPP connection (128Kbps), follow these steps:
a. Click the “More” button and select the item “Edit entry and modem properties”.
b. Under the Basic tab, set “Dial using:” to Multiple Lines.