Multitech IWAY MT128ISA-SV - Manual (Page 48)

48-IWay Hopper
Installation
2.6.6 Accessing the Outside World Using Dial-Up Networking
You are now done with the configuration process and should be ready to make a
connection to your server. Click the Dial-Up Networking icon, and select the
name configured above in the phone book entry and click “Dial”. The system
should then dial and connect to your ISP at either 128k or 64k depending on how
you setup the call. The server will verify your login name, password, and register
you on the server.
If you double-click the small icon of Dial-Up Networking at the right-bottom of
Windows, the Dial-Up Networking Monitor shows your connection status includ-
ing connection speed, server type, etc. You are now ready to use the Internet tools
to access the Internet or network tool to access remote network.
If you have problems after connecting such as the line dropped or you cannot
access the Internet, or you cannot access your remote network, go back to check
your network settings with your ISP or network administrator.
2.6.7 Reconfigure the ISDN Settings
If you want to reconfigure the ISDN settings such as Switch type, or Codec, click
the Network icon in the Control Panel and the Adapter tab. Select the “ISDN PC
Adapter” and click Properties. You will see the a Bus Location dialog box, click
OK.