4 connecting the mbb100, Connecting the mbb100, Figure 2 - mounting bracket screw hole locations – Maretron MBB100 User Manual
Page 8: Figure 3 - mounting brackets attached to mbb100, Connecting the mbb100 (section 2.4, Mbb100 user’s manual
Advertising
MBB100 User’s Manual
Figure 2 - Mounting Bracket Screw Hole Locations
Figure 3 - Mounting Brackets Attached to MBB100
2.4
Connecting the MBB100
Most I/O interface connections of the MBB100 are found on rear panel (see
Figure 4). The I/O interface panel located on the rear of the MBB100 has the following I/O interface
connectors:
• 2 x 9-36VDC power connectors
• 1 x Audio line-out jack
• 1 x Reset button
• 1 x RS-232 serial interface connector
• 1 x RJ-45 Gigabit Ethernet LAN ports
• 2 x USB 2.0 connectors
Page 4
Revision 1.0
Advertising