Section 3: know your snow thrower, Shift lever, Gas cap – MTD 769-01276A User Manual

Page 8: Choke control, Throttle control, Primer, Oil fill, Engine controls

Advertising
background image

8

SECTION 3: KNOW YOUR SNOW THROWER

WARNING:

Read, understand, and follow

all instructions and warnings on the machine
and in this manual before operating.

NOTE:

For detailed starting instructions and more

information on all engine controls, refer to the
Tecumseh Engines manual packed separately and
Starting The Engine on page 10 of this manual.

Shift Lever

The shift lever is located on the right side
of the handle panel. Place the shift lever
into any of eight positions to control the
direction of travel and ground speed.

Forward

Your snow thrower has six forward (F)
speeds, with position number one (1)
being the slowest speed.

Reverse

Your snow thrower has two reverse (R)
speeds, with position number one (1)
being the slower speed.

Gas Cap

Unthread the gas cap to add gasoline to
the fuel tank.

Choke Control

The choke control is found on the rear of the engine and
is activated by rotating the knob clockwise. Activating
the choke control closes the choke plate on the
carburetor and aids in starting the engine.

Throttle Control

The throttle control is located on the
engine. It regulates the speed of the
engine and will shut off the engine
when pushed down completely.

Primer

Depressing the primer forces fuel
directly into the engine’s carburetor to
aid in cold-weather starting.

Oil Fill

Engine oil level can be checked and
oil added through the oil fill.

Choke

Primer

Recoil Starter

Ignition

Drive Control

Auger Control

Shift Lever

Skid Shoe

Augers

Chute Assembly

Oil Fill

Gas Cap

Chute Directional

Control

Clean-out

Tool

Electric Starter Outlet

Key

Throttle

Control

Control

Handle

Engine Controls

Electric Starter Button

Two-Way Chute Control†

Heated Handles Switch†

†If Equipped

Advertising