Production line management – Moxa Technologies MOXA V91 User Manual
Page 17
Industrial Networking Solutions
7
i n f o @ m o x a . c o m
w w w. m o x a . c o m
Industrial Networking Applications
>
Production Line Management
1
Products
Production Line Management
By incorporating monitoring devices into a centralized control network, manufacturers can achieve significant gains in productivity� Moxa offers
products that directly or wirelessly connect CNCs, robots, AGVs, sensors, PLCs, RTUs, and other devices to management networks�
The EDS-728 offers up to 4 Gigabit ports,
advanced network control, and scalability for
a high-performance network backbone�
The EDS-508A Ethernet switch forms a
redundant Ethernet network with a recovery
time under 20 ms, connecting Ethernet
devices for non-stop daily operation�
The VPort 351 video encoders feature
wide operating temperature from -40 to
75°C, fiber support, and fanless design for
distributed IP surveillance systems�
The ioLogik E2214 I/O device provides
event-driven alarm messaging with real-time
stamps, Click&Go configuration, and SNMP
support for real-time monitoring and local
control of meters and sensors�
The AWK-3121 and NPort® W2150 Plus can
connect primary workstations and factory
equipment to a wireless network�
The IA262-I features DIOs to control
conveyer belts, VGA connectors to display
and collect scanned data, and is also capable
of computing and sending data to the
control center�
The NPort® 6650-32 collects serial data
from meters and sensors transmitting the
data to central servers�
The IMC-101 converts 10/100BaseT(X) to
100BaseFX fiber optic connections�
The NPort® S8455I-MM-SC integrates 2
fiber ports, 3 Ethernet ports, and 4 RS-
232/422/485 serial ports, connecting both
Ethernet and serial devices to an Ethernet
network for redundancy�
The MGate MB3170 is designed to integrate
Modbus, TCP, ASCII, and RTU devices in
almost any master/slave combination�
The UPort 1410 converters can connect 4
RS-232/422/485 devices to your workstation
by USB�
The CP-104EL connects an industrial PC
directly to multiple PLCs, meters, RTUs, and
other monitoring devices�