Getting started – Marantz RC5000i User Manual
Page 11
User Guide
9
Home Buttons Jump to Device Panel Groups
and Change Your Receiver’s Inputs
Each of the Device Panel Groups has a matching Device button on
the home panel. These Device buttons perform two actions when
pressed:
1 Jumps to the main panel of the Device Group.
2 Changes your home theater receiver/preamp to the appropriate
input. See page 30 to program for a non-Marantz
receiver/preamp.
Jump to a Device Panel Group
Without Changing Inputs
1 Pop up the Device menu, by tapping
the Device Menu bar.
2 Look at the labels for the Left and Right
hard buttons. Now, they are labeled
NO IR.
3 Press and hold either of the two Left and Right hard buttons,
then select the device you would like to jump to. No input
commands will be sent to your receiver/preamp.
While you are pressing and holding one of
the NO IR buttons, the remote icon will
turn its back to you.
Getting Started