Marantz RC5000i - Manual (Page 17)

Third setup panel displays:
The Percentage of free memory available for new programming.
There are two configurations built in to your RC5000i. If your
third setup screen says:
Marantz V201 You are using the factory default file.
Revert V201 You are using the memory saving, stripped-
down file. See pages 17 and 57.
To exit Setup Mode
Tap the Setup label on the RC5000i icon.
User Guide
15
Getting Started
5. The Mode Menus
To help you plan how your RC5000i will operate your home theater
system, you should practice using the three mode menus.
Working with Modes
All customization is done via the three Mode
menus. They differ in their capabilities:
Macro Side - No IR learning is possible, so
there is no LEARN ability.
Home Panels - Since there is only one Home
group, there is no ability to add or move groups.
Device Side - No Macros can be programmed,
so there is no EDIT button.
The mode menus are utilized like this:
1 Select either the Home, Device or Macro divisions of panels by
touching the appropriate tabs or the Home Icon.
2 Touch the Mode icon at the bottom of the screen.
Devices Macros Home