Meyer Sound HMS-10TM - Manual (Page 12)

CHAPTER 3: POWERING HMS-10 LOUDSPEAKERS
12
CONNECTING HMS-10 LOUDSPEAKERS TO
THE MPS-488 EXTERNAL POWER SUPPLY
The original MPS-488 was designed for use with the
MM-4XP miniature loudspeaker. While the MPS-488 can
power up to eight MM-4XP loudspeakers, it can only power
up to four HMS-10 loudspeakers (due to the HMS-10’s
higher power requirements and current draw).
Because the MPS-488 can power a maximum of four
HMS-10 loudspeakers, the loudspeakers should only be
connected to Channel Outputs 1, 3, 5, and 7. Do not use the
even-numbered channel outputs.
NOTE: The MPS-488HP external power supply
replaces the MPS-488 model, which was origi-
nally designed for use with MM-4XP loudspeakers.
The MPS-488 is also compatible with HMS-10 loud-
speakers and can drive up to four units (using every
other Channel Output).
MPS-488 with Four HMS-10 Loudspeakers
X X X X X X X X
MPS-488