MITSUBISHI ELECTRIC PK10 - Manual (Page 13)

EN-13
Remote control
(optional accessory) Catch
Battery holder
1 Power button
2 Four directional buttons
3 Enter button
4 Menu button
5 Keystone S T buttons
6 Hi-Bright button
7 Computer button
8 Video button
9 Blank button
10 Still button
11 4:3/16:9 button
12 Auto button
For the first time use:
Remove the transparent
insulation tape by pulling it
before use.
For battery change:
1. Push the catch to the right
and remove the battery
holder.
2. Remove the old Lithium
coin cell and install new
one (CR2025). Ensure
that the side with the mark
“+” is up.
3. Push the battery holder
back into the remote
control until you feel a
click.
1
2
3
4
8
9
10
11
7
6
5
Hi-Bright Still
Computer Video
12