MITSUBISHI ELECTRIC PK10 - Manual (Page 20)

EN-20
Power-on
1. Turn on the device connected to the projector first.
2. Plug the AC adapter in both the projector and the wall
outlet.
The POWER indicator lights up.
The CHARGE indicator lights up when the projector
connects with a not fully charged battery.
The projector charges a not fully charged battery
all the time.
The projector stops charging battery when
battery is fulled.
3. Press the POWER button either on the control panel
or the remote control.
The LAMP indicator lights up and the POWER
indicator goes off.
The lamp occasionally fails to light up. Turn off
the projector, wait for one minute and then turn
on it again.
After the POWER button is pressed, the image
may flicker before the lamp becomes stable. This
is not a product malfunction.
Condition LAMP (Green) POWER (Red)
Stand-by. Off On
When the lamp is on. On Off
Indicator
Basic operation
On the control panel
4 3 3
COMPUTER
VIDEO AUTO POSITION
Hi-Bright Still
Computer Video