Maytag 2612990 - Manual (Page 4)

If Auto Temperature Control is selected
with a Warm/Warm, Warm/Cold, or
Cold/Cold water temperature setting, the
light will illuminate during the first fill.
MAV7650 Only – Auto Temperature Control
is activated automatically when
warm/warm, warm/cold, or cold/cold water
temperatures are selected.
3
USE
SUPER WASH – Can be used with any
wash cycle to clean very heavily soiled
items. Provides fast agitation and normal
spin throughout all cycles.
GENTLE WASH – Can be used with any
wash cycle to provide a normal agitation
and slow spin. Use with delicate items
including those labeled “Hand Wash.”
AUTO TEMPERATURE CONTROL –
Assures a cold water wash of 75° F and
warm water wash of 95° F. This option
Step 4 Select a
customized cycle
Press the appropriate button(s) to select
one or more options.
Step 5 Start washer • Add detergent and any additives
• Add load and close lid
• Pull the control dial out to start
HOT/COLD – White and heavily soiled,
color-fast items
WARM/WARM – Delicate or colorfast items
WARM/COLD – Moderately soiled,
colored items; most wrinkle free items
COLD/COLD – Brightly colored, lightly
soiled items; washable woolens
LOAD TYPE
REMEMBER: In wash water temperatures
below 65° F, detergents do not dissolve
well or clean well. Care labels define cold
water as up to 85° F.
Step 3 Select water
temperature
Press the appropriate button to select the
wash and rinse temperatures. Follow the
garment care label for best results. Use the
chart at the right as a guide.
SUPER
CANCEL
C
ONTROLS AT A GLANCE
CONT.
assures detergent will dissolve and provide
optimum cleaning results.
EXTRA RINSE – Provides an additional
rinse at the end of the cycle to more com-
pletely remove laundry additives, suds, per-
fume, etc.
NORMAL RINSE – Cancels the second
deep rinse. Provides only one deep rinse.
CANCEL – Press this button to cancel and
reset any of the options.