Reassembly instructions, Attention when cf-52 series is repaired, Setting the main high pcb – Matsushita CF-52AJYZDZM User Manual
Page 35
9-12
9.2.
Reassembly Instructions
9.2.1.
Attention when CF-52 series is repaired
• Please execute writing BIOS ID when you exchange the Main Board.
• You cannot reuse the Conductive Clothes and the heat dissipating parts such as Sheet and Rubber. Use new parts.
9.2.2.
Setting the MAIN HIGH PCB
Note:
After replacing the Main Board, rewrite the BIOS ID.
1. Set the MAIN HIGH PCB to the computer.
2. Fix the MAIN HIGH PCB using the two Screws <N1>. No.1, No.2
3. Fix the MAIN HIGH PCB using the two Screws <N4>. No.3 to No.6
4. Fix the MAIN HIGH PCB using the two Screws <N13>.
5. Connect the Battery Cable to the Connector (CN42).
Screw <N1> : DFHE5035ZB
Screw <N4> : DRHM0093ZA
Screw <N13> : DXYN2+F12FNL
Screws <N9>: DFHE5025XA
<N13>
<N4>
CN4
MAIN HIGH PCB
Battery
cable
<N4>
<N1>
<N4>
:No.1
:No.2
:No.3
:No.4
:No.6
:No.5