Playback, Inserting the cds, Normal playback (play 2 ) – Marantz CC3000 User Manual

Page 11

Advertising
background image

Inserting the CDs

NOTE!
Use only audio CD; audio CD-R or audio CD-RW.

• Press POWER-ON/OFF to switch the changer on.
– The changer will now start CD detection to check how

many CDs there are in the CD compartment. The
turntable will rotate slowly until all positions (1 - 5)
in the CD compartment have been checked.

– The position which is being checked is always shown

on the display (

).

– After CD detection the 1 - 5 CD number indicator will

show the number of CDs in the CD compartment.

• Open the CD compartment by pressing OPEN/CLOSE.

lights up.

• Insert the CDs, printed side up; use the LOAD

button to rotate the turntable
in the CD compartment.

• Close the compartment by

pressing OPEN/CLOSE.

lights up. The

changer will start CD
detection again.

NOTE!
– CD detection may never be interrupted. If, during

detection, you press any button, then the changer
will stop detection and the display will give an
incorrect indication of the number of CDs in the CD
compartment.

Always remove all CDs from the CD compartment if

you want to transport the changer.

Normal Playback (PLAY

2)

– The display shows the number of the current CD.

• Press PLAY

2 to start playback.

– The CD number indicator (1-5) always shows what CD

is being played (

B

flashes).

– The track being played and its elapsed playing time

are shown under TRACK and TRACK TIME.
See 'CALLING UP INFORMATION ON THE DISPLAY' if
you wish to see other information on the display.

– Play will stop after all CDs have been played.
• Press POWER-ON/OFF to switch the changer off.

Quick Play
• Use the PREFERRED POSITION

in the CD compartment if you
wish to insert only one CD and
then start play by pressing the
QUICK PLAY button. Play will
then start immediately with
the inserted CD.

NOTE!
– You can also press PLAY

2 immediately after in-

serting the CDs; the compartment then closes
automatically and play starts from the first available
CD.

– You can interrupt playback by pressing PAUSE

;;

PAUSE then lights up. Press PLAY

2 or PAUSE ;; to

restart.

– If you press PLAY

2 during play, the current track will

start again from the beginning.

– You can stop playback by pressing STOP

9 .

– If you press OPEN/CLOSE during play, the CD

compartment will open while play continues. The
three CDs outside the changer may now be changed
without playback being interrupted.

1

3

2

11

English

PLAYBACK

LOAD

QUICK PLAY

PREFERRED

POSITION

LOAD

QUICK PLAY

PREFERRED

POSITION

Advertising
This manual is related to the following products: