Installation of ink sheet – MITSUBISHI ELECTRIC CP900DW User Manual
Page 16
13
CONNECTIONS
PRECAUTIONS
FEA
TURES
PREP
ARA
TION
TROUBLE-
SHOOTING
OTHERS
INSTALLATION OF INK SHEET
2
2
2
2
2
INSTALLING THE INK SHEET
Load the ink sheet roll to the ink cassette before inserting the ink cassette into the printer.
1
1
1
1
1
Insert the ink sheet rollers gear into the holes of the ink cassette.
Put the white roller (rolled with ink sheet) to the ink cassette first.
Then, insert the colored roller (take-up) to the ink cassette.
2
2
2
2
2
Put the other sides of rollers. Set IC at this time.
IC chip with the IC holder is attached to the ink sheet.
Set the IC holder to the ink cassette as shown right.
White roller
Colored roller
NOTE
•
Do not remove the IC chip or IC holder from the ink sheet.
Removal of the IC will stop the printer from functioning correctly.
•
Set the projected part of the IC holder to the correct position as shown below.
Projected part
IC holder
2
2
2
2
2
INSTALLING THE INK CASSETTE
1
1
1
1
1
Eliminate any slack of the ink sheet.
Hold the colored roller and turn the white roller.